Your vehicle has an intelligent electronically controlled door system that is in constant communication with overall vehicle systems.

When you lock your vehicle using the lock switch on each door interior trim panel, or by using the keyless entry keypad or the lock sensor on each door exterior trim panel, the exterior door handle switches do not release the doors. This helps to secure your vehicle and prevent unauthorized entry. Also, when your vehicle reaches a speed greater than 12 mph (20 km/h), the exterior door handle switches do not release the doors.

If the airbags deploy or the fuel pump shutoff switch activates, all interior and exterior unlock switches do not unlock your door for six seconds. This helps to secure the doors in the event of a crash. After six seconds all switches reset, and you can open the doors using the interior and exterior unlatch switches.

An LED on each front door window trim illuminates when you lock the doors. It remains on for two to five seconds after you switch the ignition off.

When you electronically lock your vehicle, the door lock switches and the interior luggage compartment release switch do not operate after 20 seconds.You must unlock your vehicle with the remote control or keyless entry keypad, or switch the ignition on, to restore function to these switches.You can switch this feature on or off using the information display controls.See   General Information. 

The intelligent access key must be within 3 ft (1 m) of the door or luggage compartment you intend to lock or unlock.

Electronic door handles are on each door. Gently depress the switch inside the exterior door handle to unlock and open the door. An unlock symbol illuminates on the door window trim indicating you have unlocked your vehicle.

Locking sensors are on both front doors. When the intelligent access key is within 3 ft (1 m) of your vehicle you can lock your vehicle by touching the locking sensor below the keyless entry keypad. Doing so causes a lock symbol to illuminate on the door window trim indicating you have locked your vehicle and you can no longer release the door using the exterior door handle switches. Touching the locking sensor when the intelligent access key is not within 3 ft (1 m) causes the lock status to display, but does not lock the doors.

Swipe across the locking sensor to display the current lock status of your vehicle. The lock status also displays when you open a door or when the lock status changes.

Press the exterior release button.

You can use the remote control at any time. When you press the lock button on the remote control, all exterior door handle switches do not release the doors. When you press the unlock button, all exterior door handle switches release the doors.

 Press and hold both the lock and unlock buttons on the remote control for three seconds to change between driver door or all doors unlock mode. The direction indicators flash twice to confirm the change. Driver door mode only unlocks the driver door when you press the unlock button once. All door mode unlocks all doors when you press the unlock button once. The unlocking mode applies to the remote control, keyless entry keypad and intelligent access.You can also change between the unlocking modes using the information display controls.  See   General Information. 

If any door is open, or if the luggage compartment or hood is open, a tone sounds and the direction indicators do not flash.The exterior lock status display also flashes if any door does not lock.You can switch this feature on or off using the information display controls.See   General Information. 

Press the lock switch on the door interior trim panel. You can no longer release the doors using the exterior door handle switches and the luggage compartment locks.

Press the unlock switch on the door interior trim panel. You can release the doors using the exterior door handle switches.

Each door has a backup power system that allows the door to function if your vehicle has no power. The system has a limited number of operations before the power depletes and turns off. When the system turns off, the door remains open and unlatched and does not close.

If your vehicle has no power and the backup power system turns off, you can close and secure your vehicle by manually resetting each door latch using a key in the position shown.

Turn clockwise to reset the latch.

Turn counterclockwise to reset the latch.

When you have reset the latch, you are then able to fully close and latch the door.

If your vehicle has no power and the backup power system disables, you can manually unlock the driver door using a key in the position shown.

This feature helps to prevent you from locking your intelligent access key inside your vehicle’s passenger compartment or rear cargo area.

 When you electronically lock your vehicle with any door open, the transmission is in park (P) and the ignition is off, the system searches for an intelligent access key inside your vehicle after you close the last door.If the system finds a key, all the doors immediately unlock and the horn sounds twice, indicating that a key is inside.

You can override the smart unlock feature and intentionally lock the intelligent access key inside your vehicle.

You can enable or disable the autounlock feature using the information display controls or an authorized dealer can do it for you.   See   General Information. 

 If you press the unlock button on the remote control and do not open a door within 45 seconds, your vehicle will lock and the alarm will arm.

The interior lamps and some exterior lamps illuminate when you unlock the doors with the remote control.

The interior lamps and some exterior lamps illuminate when all the doors have closed and you switch the ignition off.

If you leave the courtesy lamps, interior lamps or headlamps on, the battery saver shuts them off 10 minutes after you switch the ignition off.

If you leave the ignition switched on, it shuts off when it detects a certain amount of battery drain, or after 45 minutes.

Press the exterior release button. Make sure your vehicle is unlocked or have an intelligent access key within 3 ft (1 m) of the luggage compartment.

To unlock and release the luggage compartment using the keypad, enter the factory-set code or your personal code and then press 5-6 on the keypad.