This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Changing a Bulb
WARNING:
Switch the lamps and the ignition off. Failure to do so could result in serious personal injury.
WARNING:
Lamps and associated components become hot when in use. Let them cool down before you remove them. |
Use the correct specification bulb. See
Bulb Specification Chart.
The following instructions describe how to remove the bulbs. To install, reverse the removal procedure.
Note:
LED lamps are not serviceable. Contact an authorized dealer.
Headlamp
A Parking lamp and direction indicator lamp.B Headlamp high beam.C Headlamp low beam and daytime running lamp.D Side marker lamp. |
Note:
You may have to remove a cover to gain access to the bulb.
Side Marker Lamp
- Remove the headlamp.See Removing a Headlamp.
- Turn the bulb holder counterclockwise and remove it.
- Remove the bulb by pulling it straight out.
Parking Lamp and Direction Indicator Lamp
- Remove the headlamp.See Removing a Headlamp.
- Turn the bulb holder counterclockwise and remove it.
- Remove the bulb by pulling it straight out.
Headlamp Low Beam and Daytime Running Lamp
- Remove the headlamp.See Removing a Headlamp.
- Carefully remove the cover.
- Turn the bulb counterclockwise and remove it.
- Disconnect the electrical connector.
Note:
Do not touch the bulb glass.
Note:
You cannot separate the bulb from the bulb holder.
Headlamp High Beam
- Remove the headlamp.See Removing a Headlamp.
- Carefully remove the cover.
- Turn the bulb counterclockwise and remove it.
- Disconnect the electrical connector.
Note:
Do not touch the bulb glass.
Note:
You cannot separate the bulb from the bulb holder.
High Intensity Discharge Headlamps
These lamps operate at a high voltage.Contact an authorized dealer if they fail.
Front Clearance Lamp (If Equipped)
- Carefully remove the lamp.
- Turn the bulb holder counterclockwise and remove it.
- Remove the bulb by pulling it straight out.
Side Direction Indicator (If Equipped)
- Remove the large mirror glass. Tilt the mirror glass fully up, pull the mirror glass toward you from the bottom.
- Remove the small mirror glass. Tilt the mirror glass fully down, pull the mirror glass toward you from the top.
- Remove the screws.
- Remove the lamp lens.
- Remove the bulb.
Rear Lamps
- Remove the screws.
- Remove the lamp.
- Turn the bulb holder counterclockwise and remove it.
| ATail and brake lamp. B Reversing lamp.C Rear clearance lamp. |
4. Remove the bulb by pulling it straight out.
High Mounted Stoplamps
This is not a serviceable item, contact an authorized dealer if it fails.
License Plate Lamp
- Carefully release the spring clip.
- Remove the lamp.
- Turn the bulb holder counterclockwise and remove it. Pull the bulb straight out.
Interior Lamp
Vehicles with Interior Sensors
- Carefully remove the lens.
- Remove the bulb.
Reading Lamps
Vehicles with Interior Sensors
- Carefully remove the lamp.
- Turn the bulb holder counterclockwise and remove it.
- Remove the bulb.
Vehicles without Interior Sensors
- Carefully remove the lamp.
- Turn the bulb holder counterclockwise and remove it.
- Remove the bulb.
Sun Visor Mirror Lamp
- Carefully remove the lamp.
- Remove the bulb.