WARNING   WARNING:  The rear view camera system is a reverse aid supplement device that still requires the driver to use it in conjunction with the interior and exterior mirrors for maximum coverage.
WARNING   WARNING:  Objects that are close to either corner of the bumper or under the bumper, might not be seen on the screen due to the limited coverage of the camera system.
WARNING   WARNING:  The operation of the camera depends on the outside temperature, vehicle and road conditions.
WARNING   WARNING:  Reverse your vehicle slowly. Failure to follow this instruction could result in the loss of control of your vehicle, personal injury or death.
WARNING   WARNING:  Use caution when the rear cargo door is ajar. If the rear cargo door is ajar, the camera will be out of position and the video image could be incorrect. All guide lines disappear when the rear cargo door is ajar. Failure to follow this instruction could result in personal injury.
WARNING   WARNING:  Use caution when turning camera features on or off when the transmission is not in park (P). Make sure your vehicle is not moving.
WARNING   WARNING:  To help avoid personal injury always use caution when in reverse (R) and when using the rear view camera.

 The rear view camera provides an image of the area behind your vehicle. During operation, lines appear in the display that represents the path of your vehicle and proximity to objects behind it.
Rear View Camera Locations
Rear View Camera Locations
The rear view camera is below the central high mounted stop lamp or on the rear cargo door.
Using the Rear View Camera
The rear view camera system displays what is behind your vehicle when you shift the transmission into reverse (R).
Note:   The reverse sensing system is not effective at speeds above 3 mph (5 km/h) and may not detect certain angular or moving objects.
Note:   If the transmission is in reverse (R) and the rear cargo door is open, no rear view camera features will display.
Note:   When towing, the camera only sees what you are towing.This might not provide adequate coverage as it usually provides in normal operation and some objects might not be seen.In some vehicles, the guidelines may disappear when you connect the trailer tow connector.
The system may not correctly operate in any of the following conditions:
  • Nighttime or dark areas if the reverse lamps are not operating.
  • If the camera is obstructed.Clean the lens with a soft, lint-free cloth and non-abrasive cleaner.
  • The camera is misaligned due to damage to the rear of your vehicle.
Rear View Camera Guidelines
WARNING   WARNING:  Objects above the camera may not be visible. Check the area behind your vehicle when necessary.

Guidelines and Centerline
AActive guidelines.
BCenterline.
CFixed guideline: Green zone.
DFixed guideline: Yellow zone.
EFixed guideline: Red zone.
FRear bumper.
If the vehicle battery is disconnected, the guidelines are not fully functional directly after the battery is reconnected. The guidelines become fully functional after you drive your vehicle as straight as possible for five minutes at a minimum speed of 31.1 mph (50 km/h).
The system uses three types of guidelines to help you see what is behind your vehicle:
  • Active guidelines show the intended path of your vehicle when reversing.
  • The centerline helps align the center of your vehicle with a trailer.
  • Fixed guidelenes show the actual path of your vehicle when reversing in a straight line.This can be helpful when backing into a parking space or aligning your vehicle with another object.
Active guidelines are only available with fixed guidelines.To use active guidelines, turn the steering wheel to point the guidelines toward an intended path. If you change the steering wheel position when driving in reverse (R), your vehicle might deviate from the original intended path.
The fixed and active guidelines fade in and out depending on the steering wheel position.When the steering wheel position is straight the active guidelines are not visible. Objects in the red zone are closest to your vehicle and objects in the green zone are further from your vehicle.
Note:   Guidelines are only available when the transmission is in reverse (R).
System Settings
You can adjust the camera settings using the vehicle settings menu.  See   Settings. 
Manual Zoom
WARNING   WARNING:  When manual zoom is on, the full area behind your vehicle may not show. Be aware of your surroundings when using the manual zoom feature.

Manual zoom is only available when you shift the transmission into reverse (R).
Selectable settings for this feature are Zoom in (+) and Zoom Out (-). Press the symbol in the camera screen to change the view. The default setting is Zoom OFF. The rear bumper remains in the image as a reference point.
Note:   Only the centerline shows when you switch on manual zoom.
Rear View Camera Delay
You can switch this feature on or off using the vehicle settings menu.  See   Settings.   The default setting is off.
When shifting the transmission out of reverse (R) and into any gear other than park (P), the camera image remains in the display until:
  • Your vehicle speed sufficiently increases.
  • You shift your vehicle into park (P).
Enhanced Parking Aids or Park Pilot (If Equipped)
You can switch this feature on or off using the vehicle settings menu.See   Settings. 
When the reverse sensing system detects an object, it displays red, yellow and green indicators at the top of the image.