This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Automatic Transmission
WARNING:
Do not apply the brake pedal and accelerator pedal simultaneously. Applying both pedals simultaneously for more than a few seconds will limit engine performance, which may result in difficulty maintaining speed in traffic and could lead to serious injury.
WARNING:
When your vehicle is stationary, keep the brake pedal fully pressed when shifting gears. Failure to follow this instruction could result in personal injury, death or property damage.
WARNING:
Apply the parking brake, shift into park (P), switch the ignition off and remove the key before you leave your vehicle. Failure to follow this instruction could result in personal injury or death. |
Selector Lever Positions
The instrument cluster displays the current position.
Park (P)
In park (P), power is not transmitted to the driven wheels and the transmission is locked. You can start the engine with the transmission in this position.
Shift into park (P) only when your vehicle is stationary.
Reverse (R)
Shift into reverse (R) only when your vehicle is stationary and the engine is at idle speed.
Neutral (N)
|
WARNING:
In neutral (N) your vehicle has the ability to roll freely. If you intend to leave your vehicle, make sure you apply the parking brake. |
In neutral (N), power is not transmitted to the driven wheels but the transmission is not locked. You can start the engine with the transmission in this position.
Drive (D)
Drive (D) is the normal position for driving.
Manual (M)
In manual (M), you can upshift or downshift using the buttons on the selector lever.
SelectShift™
Use this feature to upshift or downshift using the buttons on the selector lever.
Shift into manual (M) to switch the feature on.
- Press the + button to upshift.
- Press the – button to downshift.
Shift into another gear to switch the feature off.
Progressive Range Selection
Use this feature to lock out gears using the buttons on the selector lever. This may provide you with an improved driving experience, for example, on slippery roads or steep slopes.
With the transmission in drive (D), press the – button to switch the feature on.
Note:
The instrument cluster displays the available and selected gears.
Press the – button again to lock out gears beginning with the highest gear. For example, press the – button twice to lock out 10th and 9th gears.
Note:
The instrument cluster only displays the available gears and the transmission automatically shifts between the available gears.
Press the + button to unlock gears to allow the transmission to shift to higher gears.
Note:
The transmission automatically shifts within the gear range you select.
Brake Shift Interlock
|
WARNING:
Do not drive your vehicle until you verify that the stoplamps are working.
WARNING:
When doing this procedure, you need to take the transmission out of park (P) which means your vehicle can roll freely. To avoid unwanted vehicle movement, always fully apply the parking brake prior to doing this procedure. Use wheels chocks if appropriate.
WARNING:
If the parking brake is fully released, but the brake warning lamp remains illuminated, the brakes may not be working properly. Have your vehicle checked as soon as possible. |
Brake shift interlock prevents you from shifting out of park (P) when you have switched the ignition on and not pressed the brake pedal.
Use the brake shift interlock lever to move the selector lever out of park (P) if you cannot start the engine.
In the event of an electrical malfunction, it is possible that a fuse has blown or the stoplamps are not working. See
Fuse Specification Chart.
If the vehicle battery has no charge, jump start your vehicle. See
Jump Starting the Vehicle - 2.0L EcoBlue.
- Using a flat-bladed screwdriver, remove the panel.
- Locate the brake shift interlock lever.
- Push the brake shift interlock lever toward the rear of your vehicle and hold it there.
- Move the selector lever from park (P) to neutral (N).
- Install the panel.
- Press the brake pedal, start the engine and release the parking brake.
Transmission Not in Park (P) Audible Warning
Sounds when you open the driver door and you have not moved the selector lever to park (P).
Automatic Transmission Information Messages
| Message | Description |
|---|---|
Transmission Service Required | The system has detected a fault that requires service.Have your vehicle checked as soon as possible. |
Transmission Not in Park | Displays as a reminder to shift into park (P). |
Press Brake to Unlock Gearshift Lever | Press the brake pedal to unlock the transmission. |