This view of the Owner’s Manual contains the very latest information, which may vary slightly from the printed Owner’s Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner’s Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Automatic Climate Control (If Equipped)
A AUTO: Press to switch on automatic operation. Adjust to select the desired temperature. Fan speed, air distribution, air conditioning operation, and outside or recirculated air adjust to heat or cool the vehicle to maintain the desired temperature. You can also switch off dual zone mode by pressing and holding for more than two seconds.B MAX Defrost: Press to switch on defrost. The driver and passenger settings set to HI, air flows through the windshield vents, and the fan adjusts to the highest speed. You can also use this setting to defog and clear the windshield of a thin covering of ice. The heated rear window also turns on when you select maximum defrost.Note: To prevent window fogging, you cannot select recirculated air when maximum defrost is on.C Power: Press to switch the system on and off. When the system is off, it prevents outside air from entering the vehicle.D Air distribution control: Press to switch air flow from the windshield, instrument panel or footwell vents on or off. You can distribute air through any combination of these vents.E Recirculated air: Press to switch between outside air and recirculated air. The air currently in the passenger compartment recirculates. This may reduce the time needed to cool the interior (when used with A/C) and reduce unwanted odors from entering your vehicle.Note: Recirculated air may turn off (or prevent you from switching on) in all air flow modes except MAX A/C to reduce the risk of fogging. Recirculation may also turn on and off in Panel or Panel/Floor air flow modes during hot weather in order to improve cooling efficiency.F MAX A/C: Press for maximum cooling. The driver and passenger settings set to LO, recirculated air flows through the instrument panel vents, air conditioning turns on and the fan adjusts to the highest speed.G DUAL: Press to switch on temperature control for the passenger side of the vehicle. When dual zone is off, passenger temperature settings remain the same as the driver settings.H Passenger temperature control: Adjusts the temperature setting on the passenger side.I A/C: Press to switch the air conditioning on or off. Use A/C with recirculated air to improve cooling performance and efficiency.Note: In certain conditions (for example, maximum defrost), the air conditioning compressor may continue to operate even though you switch off the air conditioning.J Heated seats: Press to switch the heated seats on and off. See
Heated Seats.
K Ventilated seats: Press to switch the ventilated seats on and off. See
Ventilated Seats.
L Fan speed control: Adjusts the volume of air circulated in the vehicle.M Heated rear window: Press to switch the heated rear window on and off. See
Heated Rear Window.
N Driver temperature control: Adjusts the temperature setting on the driver side. This control also adjusts the passenger side temperature when you switch off dual zone mode. |