This view of the Owner’s Manual contains the very latest information, which may vary slightly from the printed Owner’s Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner’s Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Starting a Gasoline Engine
When you start the engine, the idle speed increases. This helps to warm up the engine.If the engine idle speed does not slow down automatically, have your vehicle checked by an authorized dealer.
Note:
You can crank the engine for a total of 60 seconds (without the engine starting) before the starting system temporarily disables.The 60 seconds does not have to be all at once.For example, if you crank the engine three times for 20 seconds each time, without the engine starting, you reached the 60-second time limit.A message appears in the information display alerting you that you exceeded the cranking time.You cannot attempt to start the engine for at least 15 minutes.After 15 minutes, you are limited to a 15-second engine cranking time.You need to wait 60 minutes before you can crank the engine for 60 seconds again.
Before starting the engine, check the following:- Make sure all occupants have fastened their seatbelts.
- Make sure the headlamps and electrical accessories are off.
- Make sure the parking brake is on.
- Move the transmission selector lever to position P.
- Turn the ignition key to on. If your vehicle is equipped with a keyless ignition, see the following instructions.
Vehicles with an Ignition Key
Note:
Do not touch the accelerator pedal.
- Fully depress the brake pedal.
- Turn the key to start the engine. Release the key when the engine starts.
Note:
The engine may continue cranking for up to 15 seconds or until it starts.
Note:
If you cannot start the engine on the first try, wait for a short period and try again.
Vehicles with Keyless Start
Note:
Do not touch the accelerator pedal.
Note:
You must have your intelligent access key in the vehicle in order to shift the transmission out of position P.
- Fully depress the brake pedal.
- Press the button.
- The key frequencies are jammed.
- The key battery has no charge.
If you are unable to start the engine, locate the backup slot (A) in one of two positions:
Type One
Type Two
Note:
If your vehicle is equipped with Type One, make sure to place the key properly into the backup slot.
Note:
If your vehicle is equipped with Type Two, make sure the buttons are facing the rear of the vehicle and the key ring up. Place the key into the backup slot.
Note:
With the key in this position, press the brake pedal, and then the button to switch on the engine.
Fast Restart
The fast restart feature allows you to restart the engine within 20 seconds of switching it off, even if a valid key is not present.
Within 20 seconds of switching the engine off, press the brake pedal and press the button. After 20 seconds have expired, you can no longer restart the engine without the key present inside your vehicle.
Once the engine has started, it remains running until you press the button, even if the system does not detect a valid key. If you open and close a door while the engine is running, the system searches for a valid key. You cannot restart the engine if the system does not detect a valid key within 20 seconds.
Failure to Start
If you cannot start the engine after three attempts, wait 10 seconds and follow this procedure:
- Fully press the brake pedal.
- Move the transmission selector lever to position P.
- Fully press the accelerator pedal and hold it there.
- Start the engine.
Automatic Engine Shutdown
If your vehicle is equipped with a keyless ignition, it has a feature that automatically shuts down the engine if it has been idling for an extended period. The ignition also turns off in order to save battery power. Before the engine shuts down, a message appears in the information display showing a timer counting down from 30 seconds. If you do not intervene within 30 seconds, the engine shuts down. Another message appears in the information display to inform you that the engine has shut down in order to save fuel. Start your vehicle as you normally do.
Automatic Engine Shutdown Override
Note:
You cannot permanently switch off the automatic engine shutdown feature.When you switch it off temporarily, it turns on at the next ignition cycle.
You can stop the engine shutdown, or reset the timer, at any point before the 30-second countdown has expired by doing any of the following:
- You can reset the timer by interacting with your vehicle (such as pressing the brake pedal or accelerator pedal).
- You can temporarily switch off the shutdown feature any time the ignition is on (for the current ignition cycle only). Use the information display to do so. See Information Displays.
- During the countdown before engine shutdown, you are prompted to press OK or RESET (depending on your type of information display) to temporarily switch the feature off (for the current ignition cycle only).
Stopping the Engine When Your Vehicle is Stationary
Vehicles with an Ignition Key
- Move the transmission selector lever to position P.
- Turn the key to off.
- Apply the parking brake.
Vehicles with Keyless Start
- Move the transmission selector lever to position P.
- Press the button once.
- Apply the parking brake.
Note:
This switches off the ignition, all electrical circuits, warning lamps and indicators.
Note:
If the engine is idling for 30 minutes, the ignition and engine automatically shut down.
Stopping the Engine When Your Vehicle is Moving
WARNING:
Switching off the engine when your vehicle is still moving results in a significant decrease in braking assistance. Higher effort is required to apply the brakes and to stop your vehicle. A significant decrease in steering assistance could also occur. The steering does not lock, but higher effort could be required to steer your vehicle. When you switch the ignition off, some electrical circuits, for example airbags, also turn off. If you unintentionally switch the ignition off, shift into neutral (N) and restart the engine. |
Vehicles with an Ignition Key
- Move the transmission selector lever to position N and use the brakes to bring your vehicle to a safe stop.
- When your vehicle has stopped, move the transmission selector lever to position P and turn the key to off.
- Apply the parking brake.
Vehicles with Keyless Start
- Move the transmission selector lever to position N and use the brakes to bring your vehicle to a safe stop.
- When your vehicle has stopped, move the transmission selector lever to position P.
- Press and hold the button for one second, or press it three times within two seconds.
- Apply the parking brake.
Guarding Against Exhaust Fumes
|
WARNING:
Exhaust leaks may result in entry of harmful and potentially lethal fumes into the passenger compartment. If you smell exhaust fumes inside your vehicle, have your vehicle inspected immediately. Do not drive if you smell exhaust fumes. |
Important Ventilating Information
If you stop your vehicle and leave the engine idling for long periods, we recommend that you do one of the following:
- Open the windows at least 1 in (2.5 cm).
- Set your climate control to outside air.