WARNING   WARNING:  The rear view camera system is a reverse aid supplement device that still requires the driver to use it in conjunction with the interior and exterior mirrors for maximum coverage.
WARNING   WARNING:  Objects that are close to either corner of the bumper or under the bumper, might not be seen on the screen due to the limited coverage of the camera system.
WARNING   WARNING:  Reverse your vehicle slowly. Failure to follow this instruction could result in the loss of control of your vehicle, personal injury or death.
WARNING   WARNING:  Use caution when the liftgate is ajar. If the liftgate is ajar, the camera will be out of position and the video image may be incorrect. All guidelines disappear when the liftgate is ajar. Failure to follow this instruction could result in personal injury.
WARNING   WARNING:  Use caution when turning camera features on or off when the transmission is not in park (P). Make sure your vehicle is not moving.

The rear view camera system provides a video image of the area behind your vehicle.
During operation, lines appear in the display which represent your vehicle’s path and proximity to objects behind your vehicle.
Rear Parking Camera
The camera is on the liftgate.
Using the Rear View Camera System
The rear view camera system displays what is behind your vehicle when you place the transmission in reverse (R).
The system uses three types of guides to help you see what is behind your vehicle:
  • Active guidelines: Show the intended path of your vehicle when reversing.
  • Fixed guidelines: Show the actual path your vehicle is moving in while reversing in a straight line. This can be helpful when backing into a parking space or aligning your vehicle with another object behind you.
  • Centerline: Helps align the center of your vehicle with an object (for example, a trailer).
Note:   If the image comes on while the transmission is not in reverse (R), have the system checked as soon as possible.
Note:   When towing, the camera only sees what is being towed behind your vehicle. This might not provide adequate coverage as it usually provides in normal operation and some objects might not be seen. In some vehicles, the guidelines may disappear once the trailer tow connector is engaged.
Note:   The camera may not operate correctly under the following conditions:
  • Nighttime or dark areas if one or both reverse lamps are not operating.
  • The camera's view is obstructed by mud, water or debris.Clean the lens with a soft, lint-free cloth and non-abrasive cleaner.
  • The rear of your vehicle is hit or damaged, causing the camera to become misaligned.
Access the rear view camera system settings through the information display.   See   General Information. 
After changing a system setting, the display screen shows a preview of the selected features.
Camera Guidelines
Note:   Dynamic guidelines are only available when the transmission is in reverse (R).
Guidelines and Centerline
AActive guidelines
BCenterline
CFixed guideline: Green zone
DFixed guideline: Yellow zone
EFixed guideline: Red zone
FRear bumper
Active guidelines are only shown with fixed guidelines. To use active guidelines, turn the steering wheel to point the guidelines toward an intended path.If the steering wheel position is changed while reversing, your vehicle might deviate from the original intended path.
 The fixed and active guidelines fade in and out depending on the steering wheel position.The active guidelines are not shown when the steering wheel position is straight.
Always use caution while reversing. Objects in the red zone are closest to your vehicle and objects in the green zone are farther away. Objects are getting closer to your vehicle as they move from the green zone to the yellow or red zones. Use the exterior mirrors and rear view mirror to get better coverage on both sides and rear of your vehicle.
Manual Zoom
WARNING   WARNING:  When manual zoom is on, the full area behind your vehicle may not show. Be aware of your surroundings when using the manual zoom feature.

Note:   Manual zoom is only available when the transmission is in reverse (R).
Note:   When manual zoom is enabled, only the centerline is shown.
This allows you to get a closer view of an object behind your vehicle. The zoomed image keeps the bumper in the image to provide a reference.The zoom is only active while the transmission is in reverse (R).When the transmission is shifted out of reverse (R), the feature automatically turns off and must be reset when it is used again.
Selectable settings for this feature are + and -. The default setting for the manual zoom is OFF.
Rear Camera Delay (If Equipped)
When you shift the transmission out of reverse (R) and into any gear while the rear camera delay is active, the camera image displays until:
  • Your vehicle speed sufficiently increases.
  • You shift your vehicle into park (P).
Selectable settings for this feature are ON and OFF. The default setting for the rear camera delay is OFF.
Enhanced Park Aids
Note:   The reverse sensing system is not effective at speeds above 6 mph (10 km/h) and may not detect certain angular or moving objects.
When the sensing system detects an object, it displays red, yellow and green highlights at the top of the image. The alert highlights all objects detected.
Selectable settings for this feature are ON and OFF.