WARNING   WARNING:  The rear view camera system is a reverse aid supplement device that still requires the driver to use it in conjunction with the interior and exterior mirrors for maximum coverage.
WARNING   WARNING:  Objects that are close to either corner of the bumper or under the bumper, might not be seen on the screen due to the limited coverage of the camera system.
WARNING   WARNING:  Back up as slow as possible since higher speeds might limit your reaction time to stop the vehicle.
WARNING   WARNING:  Use caution when using the rear video camera and the trunk is ajar. If the trunk is ajar, the camera will be out of position and the video image may be incorrect. All guidelines (if enabled) have been removed when the trunk is ajar.
WARNING   WARNING:  Use caution when turning camera features on or off while in R (Reverse). Make sure the vehicle is not moving.

The rear view camera system provides a video image of the area behind your vehicle. The image will display in either the rear view mirror or the display in the center of the instrument panel.
During operation, lines will appear in the display that represent your vehicle’s path and proximity to objects behind your vehicle.
Rear View Camera
The camera is located on the trunk near the high-mount brake lamp.
Using the Rear View Camera System
The rear view camera system displays what is behind your vehicle when you place the transmission in Reverse (R).
The system uses three types of guides to help you see what is behind your vehicle:
  • Active guidelines: Show the intended path of your vehicle when reversing.
  • Fixed guidelines: Show the actual path your vehicle is moving in while reversing in a straight line. This can be helpful when backing into a parking space or aligning your vehicle with another object behind you.
  • Centerline (if applicable): Helps align the center of your vehicle with an object (trailer).
Note:   If the transmission is in Reverse (R) and the luggage compartment is ajar, no rear view camera features will display.
Note:   If the image comes on while the transmission is not in Reverse (R), have the system inspected by an authorized dealer.
Note:   When towing, the camera only sees what you are towing behind your vehicle. This might not provide adequate coverage and you might not see some objects. In some vehicles, the guidelines may disappear once you connect the trailer tow connector.
The camera may not operate correctly under the following conditions:
  • Nighttime or dark areas if the reverse lamps are not operating.
  • Mud, water or debris obstructs the camera's view. Clean the lens with a soft, lint-free cloth and non-abrasive cleaner.
  • The camera is misaligned due to damage to the rear of your vehicle.
To access any of the rear view camera system settings, make the following selections in the touch screen when the transmission is not in Reverse (R):
  • Menu > Vehicle > Rear View Camera
After changing a system setting, the touch screen shows a preview of the selected features.
Guidelines and the Centerline
Note:   Active guidelines and fixed guidelines are only available when the transmission is in Reverse (R).
Note:   The centerline is only available if Active or Fixed guidelines are on.
Guidelines and Centerline
AActive guidelines
BCenterline
CFixed guideline: Green zone
DFixed guideline: Yellow zone
EFixed guideline: Red zone
FRear bumper
Active guidelines are only available with fixed guidelines. To use active guidelines, turn the steering wheel to point the guidelines toward an intended path. If you change the steering wheel position while reversing, your vehicle might deviate from the original intended path.
The fixed and active guidelines fade in and out depending on your steering wheel position. When your steering wheel position is straight, the active guidelines are not visible.
Always use caution while reversing. Objects in the red zone are closest to your vehicle and objects in the green zone are farther away. Objects are getting closer to your vehicle as they move from the green zone to the yellow or red zones. Use the side view mirrors and rear view mirror to get better coverage on both sides and rear of your vehicle.
Selectable settings for this feature are ACTIVE + FIXED, FIXED and OFF.
Visual Park Aid Alert
Note:   Visual park alert is only available when the transmission is in Reverse (R).
Note:   The reverse sensing system is not effective at speeds above 3 mph (5 km/h) and may not detect certain angular or moving objects.
The system uses red, yellow and green highlights that appear on top of the video image when the reverse sensing system detects an object. The alert highlights the closest object detected. You can disable the reverse sensing alert if you have visual park aid alert enabled, you will still see the displayed highlighted areas.
Selectable settings for this feature are ON and OFF.
Manual Zoom
WARNING   WARNING:  When manual zoom is on, the full area behind your vehicle is not shown. Be aware of your surroundings when using the manual zoom feature.

Note:   Manual zoom is only available when the transmission is in Reverse (R).
Note:   Only the centerline shows when you enable manual zoom.
This allows you to get a closer view of an object behind your vehicle. The zoomed image keeps the bumper in the image to provide a reference. The zoom is only active while the transmission is in Reverse (R). When you shift the transmission out of Reverse (R), the feature automatically turns off and you must enable it to use it used again.
Selectable settings for this feature are ON and OFF.
Rear Camera Delay
When shifting the transmission out of Reverse (R) and into any gear other than Park (P), the camera image remains in the display until your vehicle speed reaches 5 mph (8 km/h or until you select a radio button.
Selectable settings for this feature are ON and OFF. The default setting for the rear camera delay is OFF.