The battery is under the driver seat.
Removing the Battery
- Fully raise the driver seat and move it fully forward. Pull the tabs upward and remove the cover.
Note:
Your vehicle may not have this cover.
- Unhook the cover and tuck it under the seat.
- Remove both seat track end caps.
Note:
Your vehicle may not have these end caps.
- Remove both seat adjustment end stop bolts at the front of the seat.
- Remove the battery clamp and cover bolts.
- Remove the battery clamp and cover.
- Remove the battery terminal cover and remove the negative (-) terminal.
Note:
Single batteries could be mounted the opposite way around in the battery tray. The negative terminal is toward the rear of your vehicle.
- Release the retaining clips and remove the cover.
- Remove the cable securing clips from the cover.
- Remove the positive (+) terminal and remove the battery.
Note:
Batteries are heavy.
- Move the second battery toward the rear of your vehicle and remove the negative (-) terminal.
- Remove the positive (+) terminal and remove the battery.
Replacing the Battery
WARNING:
Make sure that you securely fasten the seat runner bolts before installing the covers. |
You must replace the battery with one of exactly the same specification.
To install, reverse the removal procedure.
Note:
Make sure that you correctly install the battery terminal covers, battery cover and battery cable clips.