This view of the Owner’s Manual contains the very latest information, which may vary slightly from the printed Owner’s Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner’s Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Hill Start Assist
WARNING:
The system does not replace the parking brake. When you leave your vehicle, always apply the parking brake and put the vehicle in P (Park).
WARNING:
You must remain in your vehicle once you have activated the system.
WARNING:
During all times, you are responsible for controlling your vehicle, supervising the system and intervening, if required.
WARNING:
If the engine is revved excessively, or if a malfunction is detected, the system will be deactivated. |
The system makes it easier to pull away when your vehicle is on a slope without the need to use the parking brake.
When the system is active, your vehicle will remain stationary on the slope for two to three seconds after you release the brake pedal. This allows you time to move your foot from the brake to the accelerator pedal. The brakes are released automatically once the engine has developed sufficient drive to prevent your vehicle from rolling down the slope. This is an advantage when pulling away on a slope, (for example from a car park ramp, traffic lights or when reversing uphill into a parking space).
The system will activate automatically on any slope that will cause significant vehicle rollback.
Using Hill Start Assist
- Press the brake pedal to bring your vehicle to a complete standstill. Keep the brake pedal pressed.
- If the sensors detect that your vehicle is on a slope, the system will activate automatically.
- When you remove your foot from the brake pedal, your vehicle will remain on the slope without rolling away for approximately two or three seconds. This hold time will automatically be extended if you are in the process of driving off.
- Drive off in the normal manner. The brakes will release automatically.